The Metal Coating Process

Step 1 : Surface Preparing

Surface preparation is the essential first stage treatment of a steel substrate before the application of any coating, and is generally accepted as being the most important factor affecting the total success of a corrosion protection system.

Step 2 : Rust Transform

Rust Transform will use when cannot sandblasting. Because if have rust stain. The coating will failure!

Step 3 : Rebuild & Repair

Rebuild & Repair After Surface preparation. The surface may be damage from corrosion. Need to rebuild first.

Step 4 : Primer Coat

Primer is a product that allows finishing paint to adhere much better than if it were used alone.Primer is a product that allows finishing coat (Top Coat)  to adhere much better than if it were used alone.  For this purpose, primer is designed to adhere to surfaces and to form a binding layer that is better prepared to receive the topcoat.

Step 5 : Top Coat

Top Coat (Finish coat)  provides the required appearance and surface resistance of the system. Depending on the conditions of exposure,it must also provide the first line of defence against weather and sunlight, open exposure, and condensation.

All Process